ERG mode still not working Fulgaz 7.0.7.0, Windows 11 v25H2. My FTP no longer show 200 but my true FTP setting, but the FTP line is way above all of the intervals bar so essentially the structured ride is not working right still.
Thirza
•
May 5
I have version 7.0.6. running on Android, but still no ERG mode and incorrect FTP (200) in a workout… I have tried re-entering weight and FTP, but that did not help.
It does connect to my heartrate strap and my Tacx Neo 2T Smart trainer, and normal rides work fine.
Unfortunately I mostly like to ride FTP workouts… Is there anything that can be done to fix this? Or maybe downgrade to the latest version that was still working?
Is this issue caused by the latest Android upgrade?
Belinda
•
May 5
I am having the exact same issue using Windows laptop. FTP showing as 200, which is not my FTP. ERG mode still not working. I have uninstalled and reinstalled FULGAZ. I disconnected Tridot and reconnected. Still nothing.
Jo M
•
May 6
I use Fulgaz on an iPad and my workouts are still not working. The line for my FTP is above all the intervals (on all workouts), so none of the bars ever reach it! ERG mode still isn’t working either.
KS Wxman
•
May 8
Win 11, Fulgaz 7.0.7, Tacx neo 2. Have now done two Fulgaz keen rides on 7.0.7 and appears to be working. One of the 2 was the same workout that I did in early April just before the V7 update and the stated output metrics appear to match.
Attempted to do one of the Keen FTP workouts. It initially shows the my FTP number with the horizontal white line in the preview, but when the ride actually stated the FTP number is way higher. It is also NOT doing the ERG mode, and could do any combo of watts/cadence in the training ride.
Any way to roll back until this gets fixed?
Klem (FulGaz)
Team•
May 4
Pinned
Hi all. The issue with ERG Mode during workouts should be resolved in the very latest software update, but I’ve had varying report of success.
Could you please check to ensure you are on the latest version, then give this a test when you have time. Please leave a comment on the new Featurebase report if ERG Mode still does not work for you:
I will keep looking into this one if needed. Thanks again for your support. - Klem
Momo181
•
May 4
Just how would I access that version in order to test it? I have a Windows 11 setup.
Thirza
•
May 5
Android version 7.0.6. here, but still workouts do not work as they should. FTP stays stuck at 200 and ERG mode does not work, Watts stick around 30.
Tried reentering weight, ERG settings and FTP and such, but no effect.
I mostly ride workouts, so this makes me really sad… I understand you guys are working hard on this, but is getting very very frustrating…
Jo M
•
May 14
I’m following up my previous comments to ask for a fix for Workouts & ERG mode to be escalated to the highest priority, as I have now been without any workout functionality for a month which is having a big impact on my training. As others have commented below, the workout functionality with ERG mode is what I mainly use and is core functionality. I don’t believe an update should be put through which results in several users losing core functionality for over a month and with no indication of when it will be restored. I am now working my way through free trials on other products so that I can resume workouts but this is far from ideal. I agree with others that I’d like the opportunity to go back to the previous version while we wait for this to be tested and resolved unless it can be sorted in the next few days.
HL
•
Jul 3
Hi FulGaz/Klem: The issue that I posted a couple of months ago is still not fixed. I still cannot do structured interval training and I feel like I should not be paying the full subscription fee when the app is basically broken. Can you let me know how to get my money back?
Elki
•
May 6
Just wanted to give some positive feedback including configuration. For me everything went smoothly today. Setup is iPad with iOS 26.2.1 and Kickr Core Trainer. FTP was what I had entered. The graphics indeed is a bit confusing since the FTP line is not crossed until during the workout. After the ride all looks reasonable.
Log in to comment and vote
Comments30
HL
May 9
ERG mode still not working Fulgaz 7.0.7.0, Windows 11 v25H2. My FTP no longer show 200 but my true FTP setting, but the FTP line is way above all of the intervals bar so essentially the structured ride is not working right still.
Thirza
May 5
I have version 7.0.6. running on Android, but still no ERG mode and incorrect FTP (200) in a workout… I have tried re-entering weight and FTP, but that did not help.
It does connect to my heartrate strap and my Tacx Neo 2T Smart trainer, and normal rides work fine.
Unfortunately I mostly like to ride FTP workouts… Is there anything that can be done to fix this? Or maybe downgrade to the latest version that was still working?
Is this issue caused by the latest Android upgrade?
Belinda
May 5
I am having the exact same issue using Windows laptop. FTP showing as 200, which is not my FTP. ERG mode still not working. I have uninstalled and reinstalled FULGAZ. I disconnected Tridot and reconnected. Still nothing.
Jo M
May 6
I use Fulgaz on an iPad and my workouts are still not working. The line for my FTP is above all the intervals (on all workouts), so none of the bars ever reach it! ERG mode still isn’t working either.
KS Wxman
May 8
Win 11, Fulgaz 7.0.7, Tacx neo 2. Have now done two Fulgaz keen rides on 7.0.7 and appears to be working. One of the 2 was the same workout that I did in early April just before the V7 update and the stated output metrics appear to match.
ZimZam
May 11
•Merged request
•22 votes
ERG Mode not working during workouts
Doing my first workout (FTP beginner) today, ERG mode doesn’t work. In settings there is an EGR mode which is enabled.
KS Wxman
Apr 13
•Merged request
•1 vote
7.0.5 bug
Attempted to do one of the Keen FTP workouts. It initially shows the my FTP number with the horizontal white line in the preview, but when the ride actually stated the FTP number is way higher. It is also NOT doing the ERG mode, and could do any combo of watts/cadence in the training ride.
Any way to roll back until this gets fixed?
Klem (FulGaz)
May 4
PinnedHi all. The issue with ERG Mode during workouts should be resolved in the very latest software update, but I’ve had varying report of success.
Could you please check to ensure you are on the latest version, then give this a test when you have time. Please leave a comment on the new Featurebase report if ERG Mode still does not work for you:
https://fulgaz.featurebase.app/p/erg-mode-reports-that-erg-still-not-functional-706
I will keep looking into this one if needed. Thanks again for your support. - Klem
Momo181
May 4
Just how would I access that version in order to test it? I have a Windows 11 setup.
Thirza
May 5
Android version 7.0.6. here, but still workouts do not work as they should. FTP stays stuck at 200 and ERG mode does not work, Watts stick around 30.
Tried reentering weight, ERG settings and FTP and such, but no effect.
I mostly ride workouts, so this makes me really sad… I understand you guys are working hard on this, but is getting very very frustrating…
Jo M
May 14
I’m following up my previous comments to ask for a fix for Workouts & ERG mode to be escalated to the highest priority, as I have now been without any workout functionality for a month which is having a big impact on my training. As others have commented below, the workout functionality with ERG mode is what I mainly use and is core functionality. I don’t believe an update should be put through which results in several users losing core functionality for over a month and with no indication of when it will be restored. I am now working my way through free trials on other products so that I can resume workouts but this is far from ideal. I agree with others that I’d like the opportunity to go back to the previous version while we wait for this to be tested and resolved unless it can be sorted in the next few days.
HL
Jul 3
Hi FulGaz/Klem: The issue that I posted a couple of months ago is still not fixed. I still cannot do structured interval training and I feel like I should not be paying the full subscription fee when the app is basically broken. Can you let me know how to get my money back?
Elki
May 6
Just wanted to give some positive feedback including configuration. For me everything went smoothly today. Setup is iPad with iOS 26.2.1 and Kickr Core Trainer. FTP was what I had entered. The graphics indeed is a bit confusing since the FTP line is not crossed until during the workout. After the ride all looks reasonable.